HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 5 Problem Solving 239
Understanding Printer Messages
TRAY x EMPTY Load the empty tray (x) to clear the message.
If you do not load the specified tray, the printer will continue
printing from the next available tray, and the message will continue
to display.
TRAY x LOAD
[TYPE] [SIZE]
Load the requested paper into the specified tray (x). (See the
sections on loading paper, starting on page 89
.)
Make sure that the trays are correctly adjusted for size.The tray
type settings (and size for Tray 1) must be set from the printer’s
control panel (page 157
).
If you are trying to print A4 or letter size paper and this message
appears, make sure the default paper size is set correctly from the
Printing Menu in the printer’s control panel.
Press G
O
to print from the next available tray.
Press - V
ALUE
+ to scroll through the available types and sizes.
Press S
ELECT
to accept the alternate type or size.
Printer Messages (continued)
Message Explanation or Recommended Action