HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 5 Problem Solving 270
Correcting Output Quality Problems
Data light is flashing but
nothing prints.
! Make sure that you are using the correct printer driver.
! Complex print job may still be processing.
! Make sure the printer is online. Make sure control panel
reads processing job.
! Open the top cover. Pull out the toner cartridge and check
for paper. Reseat the toner cartridge.
! Open trays 2 and 3. Make sure that the appropriate paper
is inserted. (For more information on paper specifications,
see page 392
.) Close the trays.
Print Speed is Too Slow
Situation Solution
First page takes much
longer to print than
following pages.
! Make sure that the printer displays READY.
! Set the PowerSave feature for a longer time period. (See
Configuration Page
on page 314.) If a page takes longer to
print due to complex formatting commands, changing the
PowerSave setting might not improve print speed. You
might want to simplify the page.
Print Job Does Not Print (continued)
Situation Solution