HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 5 Problem Solving 298
Correcting Output Quality Problems
PS Troubleshooting
Situation Solution
A text listing of PS
commands prints
instead of your PS
printing job.
The control panel PERSONALITY=AUTO setting may have been
confused by a nonstandard PS code. Check the PERSONALITY
setting to see if it is set to PS or PCL. If it is set to PCL, set it to
PERSONALITY=AUTO. If it is set to AUTO, set it to PS for this print
job only. When the job has printed, return the setting to AUTO.
The job prints in Courier
(the printer’s default
font) instead of the font
you requested.
! The requested typeface is not available in the printer or is
not present on the disk. Use a font download utility to
download the desired font.
! Fonts downloaded to memory are lost when the printer is
turned off. They are also lost if Resource Saving is not
used and a personality switch is performed to print a PCL
job. Disk fonts are not affected by PCL jobs or by turning
the printer off.
! Print a PS Font Page to verify that the font is available. If a
disk font appears to be missing, it may be because a
software utility was used to delete the font, because the
disk was re-initialized, or because the disk drive is not
installed correctly. Print a configuration page to verify that
the disk drive is installed and functioning correctly.
! Print a Disk Directory to help identify available fonts.