HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 5 Problem Solving 303
Correcting Output Quality Problems
Connection cannot be
established or seems to
take longer than usual.
! Use a device that is IRDA-compliant; look for an IRDA
symbol on the device or see the computer’s user guide for
IRDA specifications.
! Make sure that the operating system on your computer
includes an FIR driver and your application uses a
compatible driver. (Note that complex pages take longer to
print.)
! Position the HP Fast InfraRed Connect within the range of
operation described in Printing a Job
on page 182, and
make sure that no object is blocking the connection. (This
object could be a hand, paper, books, or even bright light.)
! Make sure that the two FIR ports are clean (free from dirt
and grease).
! Bright light of any kind (sunlight, incandescent light,
fluorescent light, or light from an infrared remote control,
such as those used for TVs and VCRs) shining directly into
one of the FIR ports might cause interference. Make sure
that no bright light is shining directly into either FIR port.
! Position the portable device closer to the FIR port on the
printer.
HP Fast InfraRed Connect Problems (continued)
Situation Solution