HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 6 HP Digital Copy 354
HP Digital Copy Operating Instructions
2-sided/N-up tab This tab has four controls for setting up the options and a
preview image that graphically illustrates the current
settings.
! 2-sided Copying - Shows the currently selected 2-sided
mode. Choose the two-sided mode you need. The
preview image will update to display your choice.
! Flip Pages Up - This setting is active if the you choose to
copy onto both sides of the output paper. By default, the
pages of the two-sided binding are flipped to the left, like
a book, when viewed from the backside of the job. When
this setting is checked, the pages are bound, appearing
flipped up when viewed from the backside of the job. The
preview image will update to display your choice.
! N-up Copying - Shows the currently selected number of
input pages to be printed on each output page. Choose
the number of input pages needed to print on each output
page. The preview image will update to display your
choice.
! Print Page Borders - This setting is active when you
select two or more pages for each sheet. When checked,
page borders will print around each page image on the
output page. The preview image will update to display
your choice.
Menu Tabs (continued)