HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index

Chapter 6 HP Digital Copy 379
HP Digital Copy Problem Solving
Equipment Error
To correct an equipment error, turn the printer and HP Digital Copy off and
then turn the printer and HP Digital Copy on. If the error message persists,
then call your service provider.
Error Message Description
Device Error:
Backside RAM Buffer
Failure
An error occurred while accessing the backside RAM buffer.
This error might require service to correct.
Device Error:
Motor Fuse Failure
The motor has a blown fuse. This error might require service
to correct.
Device Error:
Lamp Fuse Failure
The lamp has a blown fuse. This error might require service
to correct.
Device Error:
Backside Optical Failure
A problem occurred with the backside optical system. This
error might require service to correct.
Device Error:
Frontside Optical Error
A problem occurred with the frontside optical system.
Device Error:
Mechanical Failure
A mechanical problem occurred. Check to make sure that
the shipping lock has been removed and reinserted properly.










