HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Appendix B Control Panel Menus 435
Print Quality Menu
Print Quality Menu
Some items in this menu can be accessed from a software application or from
the printer driver (if the appropriate driver is installed). Printer driver and
software application settings override control panel settings. For more
information, see page 146
.
Item Values Explanation
RESOLUTION
=FASTRES
1200
300
600
FASTRES 1200
Select the resolution from the following values:
300: Produces draft print quality at the printer’s maximum
speed (32 ppm). 300 dpi (dots per inch) is recommended
for some bitmapped fonts and graphics, and for
compatibility with the HP LaserJet III family of printers.
600: Produces high print quality at the printer’s maximum
speed (32 ppm).
FASTRES 1200: Produces optimum print quality
(comparable to 1200 dpi) at the printer’s maximum speed
(32 ppm).
Note
It is best to change the resolution from the printer driver or
software application. (Driver and software settings
override control panel settings.)