HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Appendix B Control Panel Menus 439
Printing Menu
Printing Menu
Some items in this menu can be accessed from a software application, or from
the printer driver (if the appropriate driver is installed). Printer driver and
software application settings override control panel settings. For more
information, see page 146
.
Item Values Explanation
COPIES=1 1 to 999 Set the default number of copies by selecting any
number from 1 to 999. Press - V
ALUE
+ once to
change the setting by increments of 1, or hold
down - V
ALUE
+ to scroll by increments of 10.
Note
It is best to set the number of copies from the
printer driver or software application. (Driver and
software settings override control panel settings.)
CROSS FEED
SIZE = INCHES
or
MILLIMETERS
INCHES
MILLIMETERS
The size of the custom paper on the cross-feed
side specified in inches or millimeters.
Note
The feed direction is the direction that paper is fed
through the printer. The cross-feed direction is
perpendicular to the feed direction.