HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index

Appendix B Control Panel Menus 445
Configuration Menu
Configuration Menu
Items in this menu affect the printer’s behavior. Configure the printer according
to your printing needs.
Item Values Explanation
POWERSAVE TIME=
30 MINUTES
15 MINUTES
30 MINUTES
1 HOUR
2 HOURS
3 HOURS
The printer enters PowerSave after it has been idle
for a specified amount of time. The PowerSave
feature does the following:
! Minimizes the amount of power consumed by the
printer when it is idle.
! Reduces wear on the printer’s electronic
components. (Turns off the display’s backlight.)
! When you send a print job, press a control panel
key, open a paper tray, or open the top cover, the
printer automatically comes out of PowerSave
mode.
Note
PowerSave turns off the backlight on the display, but
the display is still readable.










