HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Appendix B Control Panel Menus 454
Configuration Menu
MAINTENANCE
MESSAGE=OFF
OFF This item appears only after the PERFORM PRINTER
MAINTENANCE message displays.
OFF: The PERFORM PRINTER MAINTENANCE message will
be cleared. If you do not replace the maintenance
kit, the PERFORM PRINTER MAINTENANCE message will be
displayed again after approximately 17,500 pages.
The message should not be turned off unless the
printer maintenance has been performed. If the
required maintenance is not performed, the printer’s
performance will degrade. For more information, see
page 190
.
NEW TONER
CARTRIDGE=NO
YES
NO
This item allows the user to tell the printer that a new
toner cartridge has been installed. Setting this item
to YES will reset the HP TonerGauge to full.
QUICK COPY
JOBS=32
1 to 50 Specifies the number of quick copy jobs that can be
stored on the printer’s hard disk.
Item Values Explanation