HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Appendix B Control Panel Menus 456
Configuration of MBM Menu
Configuration of MBM Menu
This menu defines the operating mode for the 7-bin Tabletop Mailbox, 8-bin
Mailbox, or 5-bin Mailbox with Stapler.
Item Value Explanation
OPERATION
MODE:
MAILBOX
MAILBOX
STACKER
JOB SEPARATOR
COLLATOR
Defines the operating mode for the multibin mailbox that is
installed.
MAILBOX: Each bin can be addressed individually as the
destination and can have a name assigned to it by the
network or printer administrator.
STACKER: Stacks the output from the lowest bin to the top,
regardless of job boundaries. This operating mode takes
advantage of the total capacity of the bins. The software
sees the multibin mailbox as one logical bin.
JOB SEPARATOR: Automatically separates incoming jobs,
which may have multiple copies, and assigns a bin to each.
It uses all the bins, but the software sees the multibin
mailbox as one logical bin. If a bin is full, the printer
automatically sends the job to the next available bin.
COLLATOR: Automatically separates mopies. Each mopy is
delivered in consecutive bins, starting with the Face-up Bin.