HP LaserJet 8150 Series Printers - Software Technical Reference

PCL 6 and PCL 5e driver features
77
Document Options
The Document Options group box dynamically sizes itself and positions controls to
reflect configuration options of the HP LaserJet 8150 printer that affect the Document
Options controls. For example, if a duplexing unit is installed and is selected on the
driver’s Configure tab, the group box dynamically changes to include the Print on Both
Sides option. The following illustration shows the Document Option group box with the
Print on Both Sides option available.
Figure 48: The Document Options group box
The default setting for the Print on Both Sides option is OFF (not selected). Print on
Both Sides is not available when:
• Paper Type is set to transparency, cardstock, or labels.
• Paper Size is anything but letter, legal, A4, B5 (JIS), executive, and custom sizes
greater than or equal to 127 mm by 190.5 mm (5.0 inches by 7.5 inches).
When Paper Size is set to letter, legal, or A4, selecting Print on Both Sides makes the
Flip Pages Up and Booklet Printing options available. The default for both of these
options is OFF.
The Flip Pages Up check box, visible only when Print on Both Sides is visible, is used
to specify the duplex-binding option. The following table demonstrates the results of
selecting this box, depending on the orientation of paper:
Orientation
Flip Pages Up selected Flip Pages Up not selected
Portrait
Short-edge binding Long-edge binding
Landscape
Long-edge binding Short-edge binding
The preview document image shows a spiral binding along either the left or the top edge
of the page to indicate how the pages will be flipped when Print on Both Sides is
selected. Also, a turned up corner appears in the lower right of the preview image with an
arrow that points in the direction that the page is flipped.