HP CM8060/CM8050 Color MFP - Print Usage Tracker

How is the new page counting method enabled?
If desired, use the following steps to enable the new page counting method (known as Print Usage
Tracker) via the product’s Embedded Web Server. See Figure 3 for a screen shot of this page.
1) Verify that your device firmware version is 20091130 77.018.0 or greater. If necessary,
upgrade your device firmware to a version that includes this feature.
2) The Print Usage Tracker acceptance and activation screen is available from the product’s
Embedded Web Server (EWS) at the following location:
EWS >> Settings >> General Security >> Print Usage Tracker
3) Review the acceptance screen so that the changes are understood and you are comfortable with
how the changes may or may not affect your HP device or product use model.
4) If you are comfortable with the acceptance statements and the new counting functionality, choose
to enable the feature. As stated previously it is very important to understand that once enabled the
device cannot return to the previous counting method.
a. Select “I Accept”
b. Select “Enable the Print Usage Tracker feature on this device”
c. Press “Apply”
NOTE: Currently this functionality can only be enabled through the product’s Embedded Web Server
(EWS). In the future, HP will provide the ability to enable this functionality through HP’s Device
management software called HP WebJet Admin. The WebJet Admin support pages can be accessed
using the following URL: www.hp.com/go/webjetadmin
Figure 3 – EWS screen shot of enabling Print Usage Tracker