HP CM8060/CM8050 Color MFP with Edgeline Technology - Job Aid - Copy

HP CM8060/CM8050 Color MFP with Edgeline Technology – Copy

How do I Steps to perform

3 Copy from the document feeder.

The document feeder holds a maximum of 100 sheets of

paper. Place the original document face-up in the

document feeder, with the top edge of the document

toward the rear of the document feeder or feeding first

into the input slot. For two-sided originals, place the first

side of the original face-up. Adjust the paper guides so

that they are touching the original document.

To make copies by using the default copy options, use

the numeric keypad on the control panel to select the

number of copies, and press Start. To use customized

settings, touch Copy. Specify the settings, and then

press Start.

4 Use the job build feature a. Place the first segment of the job into the

document feeder or onto the scanner glass.

b. ns that Touch Copy, and then set the copy optio

you want to use.

c. and then select Touch Job Build Job Build on.

Touch OK.

d. to scan the first segment. Press Start

e. The device prompts you to load the next

segment. If you have more segments to scan,

touch Scan. When you have finished scanning all

the segments, touch Finish.

f. an select copy After you select Finish, you c

options that apply to the entire job, such as the

number of copies or a stapling option.

g. ntire job. Press Start to make the copies of the e

www.hp.com

Development Company, L.P.