HP CM8060/CM8050 Color MFP with Edgeline Technology - Job Aid - PCL Printing

HP CM8060/CM8050 Color MFP with Edgeline Technology PCL – Printing
How do I Steps to perform
16 Select staple output options.
Click on the Output tab. Use the Output Options drop-
down menu to determine whether the print job should be
stapled. The available output options depends on the
accessory output bin or optional finisher installed on the
device.
17 Select image shift settings.
Click Image Shift Settings to open the Image Shift
dialog box. Use the Image Shift dialog box to shift the
image on the page. This is useful when binding the
document or using 3–hole punch.
18 Select output bin.
Use the Output Bin Options to determine where the
print job should exit the device. The available output bin
options depends on the accessory output bin or optional
finisher installed on the device.
How do I Steps to perform
19 Select advanced printing options.
Click on the Advanced tab. Select options under the
Paper/Output, Graphic, or Document Options
sections. Click a current setting to activate a drop-down
list or spin box where you can enter a new value. Click
OK when finished. For example, to change the order of
pages as they print, click the arrow by Layout Options,
and then select Page Order: Front to Back (page 1 is
on the top of the stack) or Back to Front (page 1 is on
the bottom of the stack).
16
17
18
19
3
©2007 Copyright Hewlett-Packard
www.hp.com
Development Company, L.P.