HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

When installing the HP CM8060/CM8050 Color MFP with Edgeline Technology over the network,
select Connected to the network in the Printer Connection dialog box, and then click Next.
NOTE: For a network installation, connect the HP CM8060/CM8050 Color MFP with
Edgeline Technology to the network and turn it on before continuing to install the printing-system
software.
NOTE: “Wired networking” refers to the print device being connected to the network through
a network cable. For wireless installation instructions when using an HP Jetdirect ew2400
802.11g Wireless Print Server or an HP Direct 380x802.11B wireless print server, consult the
documentation that comes with the print server.
If the network has a firewall that is blocking the installation, the Firewall Detected dialog box
appears for Windows XP, or the Disable Your Firewall dialog box appears for Windows Vista, as
shown in the following figures.
Figure 3-6 Firewall Detected dialog box (Windows XP)
Click Next to continue. The Searching dialog box appears (see
Figure 3-8 Searching dialog box
on page 104).
102
Chapter 3 Install MS Windows printing-system components
ENWW