HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

Figure 3-15 Change TCP/IP Settings dialog box
If you change information in the IP Address:, Subnet Mask:, or Gateway: fields (without clicking
Next) and then click Suggest Settings…, the fields refresh with information that was found by the
installer and reported in the Printer Found screen.
Type a different TCP/IP Address, Subnet Mask, or Gateway address and then click Next to open the
Confirm Network Settings dialog box (see
Figure 3-13 Confirm Network Settings dialog box
on page 109).
If you clear the Use Default Port Name check box and click Next, the Set Port Name dialog
box opens (see
Figure 3-19 Set Port Name dialog box on page 115).
The Check Printer Connection dialog box, which appears when No, I want to install a
different printer. is selected in the Printer Found dialog box or if the system failed to detect the
device over the network, is shown in the following figure.
ENWW Print-driver installation instructions 111