HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

After selecting any of the options, type the appropriate name or address and then click Next. The
Model dialog box opens (see
Figure 3-43 Model dialog box on page 137).
For each of the options in the Specify TCP/IP Port dialog box, either use the default port name, as
specified in each of the three options, or specify a different name.
To use the default port name, select Use Default and click Next. To specify a different name, click
Specify, type a port name, and click Next. The Port Creation Options dialog box appears.
Figure 3-41 Port Creation Options dialog box
Select No, do no create the port (the printer will not be installed) if you do not want to
create a port.
If you select Yes, create the port, type the device hardware address in the Hardware Address
field and then click Next to open the Model dialog box.
If you click Next without typing a hardware address, a network setup error message appears, as
shown in the following figure.
Figure 3-42 Please enter a Hardware address.: Network Setup Error dialog box
136
Chapter 3 Install MS Windows printing-system components
ENWW