HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

Figure 3-54 Printer Properties General tab
NOTE: Click any of the device properties to make the field available for typing or to see the
drop-down menu selections.
On the General tab, change the device name by typing a new name in the Printer Name field.
Use the Location and Comment fields to describe the device, or leave these fields blank.
To use the HP CM8060/CM8050 Color MFP with Edgeline Technology as the default device, select
Yes in the Use this as the default printer drop-down menu.
To share the device over a network, select Yes in the Shared drop-down menu. The default setting is
No.
Click OK to return to the Ready to Create Installer dialog box.
In the Ready to Create Installer dialog box, click Next to begin the process of copying and
installing the printing-system software folders and files. The Installing dialog box is shown in the
following figure.
146
Chapter 3 Install MS Windows printing-system components
ENWW