HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

Figure 3-56 Finish dialog box
Click Finish to close the Finish dialog box and exit the Installer Customization Wizard.
Distribution
The installation package is now ready for distribution. It is the same as the package on the Windows
printing-system CD, except that it is limited to one language, and it contains the selected features and
options. To install the custom installation package, run the SETUP.EXE file from the root of the package.
For detailed information, see the HP Driver Preconfiguration Support Guide, which is available on the
System Administrator's CD.
Point-and-Print installation for Windows Vista, Windows 2000,
Windows XP, and Windows Server 2003
Use the following information to install a print driver by using the Microsoft Point-and-Print feature when
you do not connect directly to the device on the network.
Point and Print is a Microsoft term that describes a two-step driver installation process. The first step is
to install a shared driver on a network print server. The second step is to "point" to the print server
from a network client so that the client can use the print driver.
This section outlines the procedures for installing print drivers by using Point and Print. If these
procedures are not successful, contact Microsoft. HP provides print drivers that are compatible with the
Point-and-Print feature, but this is a function of the MS Windows operating systems, not of HP print
drivers.
Administrator privileges are necessary to install the print driver on a Windows Vista, Windows 2000,
Windows XP, or Windows Server 2003 operating system.
148
Chapter 3 Install MS Windows printing-system components
ENWW