HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

Fax-driver installation instructions
Use the HP MFP Send Fax driver software to send fax jobs from the computer to the device over a
network. The fax driver is installed on the client computer.
This STR provides information about the HP MFP Send Fax driver that is used with the HP Analog Fax
Accessory when it is installed in the HP CM8060/CM8050 Color MFP with Edgeline Technology.
The following operating systems support this driver:
●
Windows Vista
●
Windows XP
●
Windows Server 2003
●
Windows 2000
For additional information, see the HP CM8060/CM8050 Color MFP with Edgeline Technology
System Administrator Guide, which is available on the System Administrator's CD.
Topics:
●
Minimum firmware
●
Install the HP MFP Send Fax driver on MS Windows
Minimum firmware
The HP CM8060/CM8050 Color MFP with Edgeline Technology requires firmware support for the HP
MFP Send Fax driver. To support the driver, the HP CM8060/CM8050 Color MFP with Edgeline
Technology must have the minimum firmware version installed. To determine if the HP CM8060/
CM8050 Color MFP with Edgeline Technology has a minimum supporting firmware version, print a
configuration page from the control panel to check the firmware datecode, and verify that the PC Send
Fax menu item appears on the control panel.
To print a configuration page:
1.
Touch Administration.
2.
Touch Information.
3.
Touch Configuration Page.
4.
Touch Print.
The firmware datecode is listed in the Device Information section of the configuration page.
To ensure the PC Send Fax menu item is enabled:
1.
On the control panel, touch Administration.
2.
Scroll to and touch Initial Setup.
3.
Scroll to and touch Fax Setup.
4.
Scroll to and touch PC Fax Send. If PC Fax Send does not appear, update the firmware.
150
Chapter 3 Install MS Windows printing-system components
ENWW