HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

●
Page Order
Print on Both Sides
The default setting for the Print on Both Sides option is off (not selected). Print on Both Sides is
available when the following conditions exist:
●
Paper Type: on the Paper/Quality tab is set to any paper type except for the following types:
●
Labels
●
Tough Paper
●
Page size: is set to any paper size except for the following size:
●
Statement
Automatically print on both sides
The duplexing unit in the device prints on two sides of a sheet of paper when the Print on Both
Sides option is specified in the print job.
Devices with a duplexer installed support smart duplexing. The smart duplexing feature increases
printing performance by preventing one-page print jobs or single-sided pages of a duplexed print job
from going through the duplexing unit even when the duplexing feature has been selected in the driver.
All paper types support the smart duplexing feature, except for paper types that cannot be printed on
both sides, such as labels, and the following paper types:
●
Prepunched
●
Preprinted
●
Letterhead
When the paper type is set to Unspecified, the smart duplexing feature is disabled.
To achieve the best print quality when printing on the second side of the page, the device makes
adjustments to its print modes. Selecting a paper type instructs the device to use a group of settings
(such as fuser temperature and print speed) to create an image that has the best possible quality for
that paper. This group of settings is known as a print mode. A different print mode is used with each
paper type. Print-mode adjustments for the second side of a duplexed page are automatic.
Flip Pages Up
Use the Flip Pages Up check box to specify the duplex-binding option. By default, the Flip Pages
Up check box is available only when Print on Both Sides is selected.
The following table demonstrates the results of selecting this check box, depending on the paper
orientation selected on the Finishing tab.
ENWW Finishing tab features 211