HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

4.
Click Properties.
5.
Click the Device Settings tab.
6.
Click the plus sign next to Installable Options to open the folder.
7.
Click Accessory Output Bin and select the installed output bin or optional finisher in the drop-
down menu.
8.
Click OK to make the Output tab available in the Printing Properties.
The Output tab contains the following controls:
●
Output Options
●
Document preview image
●
Output Bin Options
Output Options
To use the Output Options control, an accessory output bin or optional finisher must be installed on
the device.
NOTE: Staple options are available only if the optional HP Multifunction Finisher is installed.
Use the Output Options drop-down menu to determine whether the print job should be stapled. The
available output options depends on the accessory output bin or optional finisher installed on the
device. The output bin can contain the following options:
●
None
●
One Staple Left
●
One Staple Left Angled
●
Two Staples Left
●
Three Staples Left
Use the Image Shift Settings... button to shift the image on the page. This is useful when binding
the document or using 3–hole punch. Click Image Shift Settings... to open the Image Shift
dialog box, as shown in the following figure.
218
Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows
ENWW