HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

System administrators can use the Form to Tray Assignment setting to specify, in the driver, the
paper size that is loaded into each available input tray. The use of forms constrains the choices that
are available in the paper-size list on the Paper/Quality tab in the Printing Preferences driver
tabs. This constraint prevents (or reduces the likelihood of) tying up the device with paper-mount
messages that occur when users request sizes or types that are not available.
The trays listed in the Form to Tray Assignment setting include standard trays and optional
accessory trays. Generally, items that are installed separately have a separate Installable Options
setting.
The input trays listed here are also listed as paper sources on the Paper/Quality tab.
Configuring the trays
1.
Select the appropriate tray in the Form to Tray Assignment list.
2.
Use the drop-down menu to select the paper size (or form) that is loaded in that tray.
3.
Repeat steps 1 and 2 for the remaining trays.
4.
Click OK to enable the settings, or, if necessary, click Cancel to reconfigure all the trays and
remove the size and type constraints that have been imposed on the Paper/Quality tab.
Font Substitution Table
Use the Font Substitution Table settings to install and remove external fonts for the device. External
fonts can be soft fonts or DIMM fonts.
Click the Font Substitution Table option to open a list of fonts, as show in the following figure. Use
the settings to change the TrueType-to-printer font mappings.
238
Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows
ENWW