HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

Document Defaults. The default setting is 600 pixel(s). Use the spin box to change this value, up
to a maximum of 32,767 pixels.
Installable Options
Topics:
●
Automatic Configuration
●
HP 4000-Sheet Input Tray (Tray 5)
●
Accessory Output Bin
●
Printer Memory
●
Printer Hard Disk
●
Job Storage
●
Mopier Mode
●
Mopier mode and collation
●
Postscript Passthrough (PS Emulation driver only)
●
JPEG Passthrough (PS Emulation driver only)
Automatic Configuration
Use the Device Settings tab to tell the driver about the hardware configuration of the device. If
bidirectional communication is enabled in a supported environment, set up this tab by selecting the
Update Now setting in the Automatic Configuration setting. The default setting is Off. After an
automatic configuration, the setting returns to Off after the changes are made.
If the computer environment does not support bidirectional communication, the Update Now setting
is unavailable, the options on this tab must be manually configured.
If more than one driver is installed for the device (for example, the default HP PCL 6 and PCL 5
drivers), the Update Now feature works automatically only on the driver on which it is activated. The
other driver will not be updated, and might show the default setting for the specific device model.
HP 4000-Sheet Input Tray (Tray 5)
This control specifies whether the optional high-capacity Tray 5 is installed on the device. The default
setting is Not Installed.
Accessory Output Bin
This control specifies whether the accessory output bin or an optional finisher is installed on the device.
The default setting is HP Single Output Bin.
Printer Memory
This option matches the setting to the amount of memory that is installed in the device. The driver
generates ranges of memory that can be selected, up to the maximum that the device can accept. The
driver can use this information to manage how the print driver uses the device memory.
244
Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows
ENWW