HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

If you want to use the IP Printing method, carry out the following steps:
a.
Click the IP Printer tab.
Figure 6-14 Printer Browser – IP Printer tab
b.
Choose HP Jet Direct – Socket from the Protocol pull-down menu. This is the
recommended setting for HP device.
c.
On the device control panel, print the configuration pages.
To print a configuration page, follow these instructions.
i.
Touch Administration.
ii.
Touch Information.
iii.
Touch Configuration Page.
iv.
Touch Print.
The device prints the configuration page.
d.
On the first configuration page, under Product Settings, find the IP Address. Type this
address into the Address field on the add printer screen.
e.
The Name, Location, and Print Using information will automatically be filled in. If the
HP CM8060/CM8050 Color MFP with Edgeline Technology PPD does not appear
in the Print Using field, turn the computer off and then on again and restart the setup
process.
ENWW Macintosh install and uninstall instructions 263