HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

NOTE: If the automatic selection fails, or if you want to manually select a PPD file, click
the Printer Model drop-down menu, choose HP, and then choose the PPD file that you
want to add. If the HP CM8060/CM8050 Color MFP with Edgeline Technology
PPD does not appear in the Model Name list, turn the computer off and then on again
and restart the setup process.
If you are using IP Printing, carry out the following steps:
a.
On the device control panel, print the configuration pages.
To print a configuration page, follow these instructions.
i.
Touch Administration.
ii.
Touch Information.
iii.
Touch Configuration Page.
iv.
Touch Print.
The device prints the configuration page.
b.
On the first configuration page, under Product Settings, find the IP Address. Type this
address into the Printer's Address field.
c.
Choose Printer Model and then choose the HP CM8060/CM8050 Color MFP with
Edgeline Technology in the Model Name list.
5.
Click Add. The HP CM8060/CM8050 Color MFP with Edgeline Technology appears in the
Printer List.
6.
Select the HP CM8060/CM8050 Color MFP with Edgeline Technology, go to the Printers
menu, and choose Show Info.
7.
Choose Installable Options from the top drop-down menu.
Figure 6-23 Installable Options screen
8.
If the device has Tray 5, change the setting from Not Installed to Installed.
9.
Select the appropriate Accessory Output Bins option.
270
Chapter 6 Macintosh
ENWW