HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

3.
Touch Configuration Page.
4.
Touch Print.
Print a menu map
Print a menu map before updating the firmware to see what user settings have been configured in the
current firmware. This menu map can be compared with a menu map printed after the firmware
update to determine what user settings have been added or changed in the new firmware.
To print a menu map from the device control panel:
1.
Touch Administration.
2.
Touch Information.
3.
Touch Configuration/Status Pages.
4.
Touch Administration Menu Map.
5.
Touch Print.
Download the new firmware from the HP Web site
The remote firmware update (.RFU) file and an associated readme file are packaged together as a self-
extracting .EXE file. For detailed instructions about how to download the .EXE file, go to one of the
following Web sites:
www.hp.com/go/CM8060edgeline_sw
www.hp.com/go/CM8050edgeline_sw
The .EXE file consists of a readme file and the .RFU file.
For UNIX systems, the remote firmware update file is a .TAR file.
Download the new firmware to the device
For support information about downloading new firmware from the Web, go to one of the following
Web sites:
www.hp.com/go/CM8060edgeline_sw
www.hp.com/go/CM8050edgeline_sw
The device can receive an RFU update when in the READY state. The device waits for all of the I/O
channels to become idle before performing the update.
NOTE: If the firmware update involves a change in the format of nonvolatile random-access
memory (NVRAM), any menu settings that are changed from the default settings will return to
default settings. The settings must be changed again if you want them to be different from the
defaults. Examples of settings that are affected in this way are tray types, default symbol sets,
and Web-access alerts.
The elapsed time for an update depends on the I/O transfer time, as well as the time that it takes for
the device to reinitialize. The I/O transfer time depends on a number of things, including the speed of
the host computer that is sending the update and the I/O method (network). The reinitialization time
276
Chapter 7 Engineering details
ENWW