HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)
To share the device, do the following:
1.
Click Start.
2.
Click Settings.
3.
Click Properties (Windows 2000) or Printers or Faxes (Windows XP Professional and
Windows Server 2003) or Printers and Other Hardware Devices (Windows XP Home).
4.
Right-click the device name.
5.
Click Properties.
6.
Click the Sharing tab.
7.
Click the Share this printer button.
8.
Enter a share name.
9.
Click Apply. Then, click OK to close.
Remote firmware update for UNIX systems
For UNIX systems, any command method that delivers the .TAR file to the device is acceptable,
including the following:
1. At the command prompt, type cp </home/yourmachine/FILENAME /dev/parallel>,
where </home/yourmachine/FILENAME> is the location of the .TAR file.
2.
The download process begins and the firmware is updated on the device. This can take several
minutes. Let the process finish without further interaction with the device or the computer. The
messages described in the section
Printer messages during the firmware update on page 277
appear on the control panel.
NOTE: The device automatically turns off and then on again to activate the update; this
can happen more than once. At the end of the update process, the READY message
appears on the control panel. Do not turn off the device or interfere with the update until
this message appears.
3.
Print a configuration page and verify that the firmware revision number matches the revision of
the current update.
NOTE: Print a menu map to see what user settings are configured in the current firmware. This
menu map can be compared with a menu map printed before the firmware update to determine
what user settings have been added or changed in the new firmware.
To print a menu map from the device control panel, see
Print a menu map on page 276.
Remote firmware update by using the LPR command
NOTE: This remote firmware update method is for use in Windows NT 4.0,
Windows 2000, Windows XP, and Windows Server 2003.
282
Chapter 7 Engineering details
ENWW