HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

Paper type that is listed in the
printer driver or on the control
panel
Description Tray 1 Trays 2, 3,
and 4
Tray 5
A3 or 11x17 inch paper must
be long-grain.
Matte Cover Plain, uncoated paper that is from
160 to 220 g/m
2
(60 to 80 lb cover)
X
Labels Uncoated, non-glossy labels X
Letterhead Fine, uncoated paper that is less than
150 g/m
2
(40 lb bond)
X X X
Preprinted Plain, uncoated paper that is less
than 150 g/m
2
(40 lb bond)
X X X
Prepunched Letter (3-hole) or A4 (2- or 4-hole)
size paper that is less than 150 g/m
2
(40 lb bond)
X X X
Colored Plain, uncoated paper that is less
than 150 g/m
2
(40 lb bond)
X X X
Bond Fine, uncoated paper that is less than
150 g/m
2
(40 lb bond)
X X X
Recycled Plain, uncoated paper that is less
than 150 g/m
2
(40 lb bond)
XXX
Custom paper sizes
The following table shows custom paper sizes that are available for the HP CM8060/CM8050 Color
MFP with Edgeline Technology.
Table 7-9 HP PCL 6 driver custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (80-sheet manual feed) Width 76 mm (3.0 inches) 215 mm (8.5 inches)
Height 127 mm (5.0 inches) 356 mm (14.0 inches)
Trays 2 – 4 (500-sheet) Width 148.0 mm (5.83 inches) 215 mm (8.5 inches)
Height 210 mm (8.26 inches) 356 mm (14.0 inches)
Trays 5 (4000-sheet high-
capacity, optional)
Width 148.0 mm (5.83 inches) 215 mm (8.5 inches)
Height 210 mm (8.26 inches) 356 mm (14.0 inches)
Duplexing unit Width 148.0 mm (5.83 inches) 215 mm (8.5 inches)
Height 210.0 mm (8.26 inches) 356 mm (14.0 inches)
NOTE: The HP Stacker/Stapler/Job Separator does not support custom paper sizes.
Table 7-8 Supported paper types for each tray (continued)
ENWW Paper attributes 293