HP CM8060/CM8050 Color MFP with Edgeline Technology - Software Technical Reference (external)

Follow these steps to print a configuration page (example procedure).
1.
Click INFORMATION.
2.
Select the check box for the information page that you want to view or print, and then click Apply.
Notification Server
Use the Notification Server page to configure e-mail settings for outgoing e-mail. Use the settings
on this page to send and receive e-mail messages, including alerts. The Notification Server page is
shown in the following figure.
Figure 2-18 HP EWS – Notification Server page
Configuring outgoing e-mail
You must configure outgoing e-mail if you intend to use the Alerts or AutoSend features.
1.
Gather the following information. (Your organization's network or e-mail administrator typically
provides the information that is required to configure outgoing mail.)
●
The TCP/IP address of the simple mail transfer protocol (SMTP) mail server on your network.
The EWS uses the SMTP server TCP/IP address to relay e-mail messages to other computers.
●
The e-mail domain name suffix that is used to address e-mail messages within your
organization.
2.
Select the Enable Outgoing E-mail check box.
3.
Type the SMTP server TCP/IP address in the SMTP Server text box.
4.
Type the domain name in the Domain Name text box.
5.
Click Apply to save the changes.
62
Chapter 2 Software description
ENWW