HP CM8060/CM8050 Color MFP with Edgeline Technology-System Administrator Guide

another item of Telepermitted equipment of a different make or model, nor does it imply that
any product is compatible with all of Telecom's network services.
Some parameters required for compliance with Telecom's Telepermit requirements are
dependent on the equipment (PC) associated with this modem. The associated equipment shall
be set to operate
within the following limits for compliance with Telecom's Specification:
For automatically initiated calls to the same number
(a) There shall be no more than 10 call attempts to the same number within any 30 minute
period for a single manual call initiation, and The equipment shall go on-hook for a period of
not less than 30 seconds between the end of one attempt and the beginning of the next
attempt.
For automatically initiated calls to the different numbers
The equipment shall go on-hook for a period of not less than 5 seconds between the end of
one attempt and the beginning of the next attempt.
Auto-answering incoming calls
Incoming calls shall be answered between 3 and 30 seconds of receipt of ringing.
For correct operation of the ringers in each device, the total of the RN's of all devices
connected to a single line at any time should not exceed 5. The RN (Ringer Number) can be
found
printed on the Telepermit Label.
澳大利亚电信声明
In Australia, the fax modem must be connected to the Telecommunication Network through a
line cord which meets the requirements of the Technical Standard AS/ACIF S008.
日本电信声明
ZHCN
电信声明
237