HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Fax tab
Use this tab to configure settings for sending faxes. Click the buttons on the left side of the window to
open each feature.
NOTE: If an administrator password is set, this tab is available only for users who have signed in with
the necessary credentials. See
Set the device administrator password on page 59.
Table 6-4 Fax tab
Feature Description
Fax Send Setup Use this page to enable the Fax Send feature and to configure a LAN Fax Service or an Internet
Fax Service. This page has the following tabs:
●
Common Job Settings: Configure default settings that apply to all outgoing fax jobs.
These are the same options that are available in the Fax feature at the device control
panel.
●
LAN Fax Setup: If the optional fax accessory is not installed, the device can send faxes
by using LAN fax software that is installed on the network. To configure the options for
this feature, see the documentation that came with the LAN fax software.
●
Internet Fax Setup: If the optional fax accessory is not installed, the device can send
faxes by using an Internet fax service, which requires a subscription. To find information
for configuring this feature, consult your Internet fax service provider.
For a complete description of how to use this page, including specific procedures, see
Fax send
setup on page 52.
Fax Activity Log This page lists information about the faxes that have been sent from or received by the device,
including the name of the user, and whether the fax was successfully sent or received.
Speed Dials Use this page to import speed-dial lists to the device from a .CSV file on the network.
For a complete description of how to use this page, including specific procedures, see
Import
fax speed-dial lists on page 54.
94 Chapter 6 Manage the device ENWW