HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Set up AutoSend
Use the AutoSend feature to automatically send device configuration information and supplies-usage
information to an e-mail destination list. In addition, you can use this feature to send device information
directly to HP if you have an active service agreement with HP.
1. Open the embedded Web server. See
Open the embedded Web server on page 40.
2. Select the Settings tab.
3. Select Notification Server from the menu on the left side of the screen. Make sure that the box
next to Enable Outgoing E-mail is selected and that the SMTP server is configured. See
Set up
the notification server on page 97.
4. Select AutoSend from the menu on the left side of the screen.
5. Select Enable AutoSend.
6. Select how often you want to send device information. For example, to send the information on
every alternate day, in the box next to Send every, type 2 and then select days.
7. In the box next to E-mail destinations, type up to 20 e-mail addresses to receive the information.
Separate the addresses with a semi-colon or a comma.
8. Click Test and verify that each e-mail address received the information.
9. Select Send to HP to send device information directly to HP at the interval you have specified. This
helps HP improve the device. For more information, click the link that is named Hewlett-Packard
Online Privacy Statement.
10. Click Apply to save the settings.
ENWW Set up AutoSend 99