HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Use Windows commands to upgrade the firmware
This procedure requires that the device be connected to a Windows network. Before beginning, obtain
the device network address or hostname. To find the address, on the device control panel, touch
Network Address.
1. Open a command prompt on your computer: Click Start, click Run, and then type cmd.
2. Type the following: copy /B <FILENAME> \\<COMPUTERNAME>\<SHARENAME>, where
<FILENAME> is the name of the .RFU file (including the path), <COMPUTERNAME> is the name
of the computer from which the device is being shared, and <SHARENAME> is the device share
name. For example: C:\>copy /b C:\8060fW.RFU \\YOUR_SERVER\YOUR_COMPUTER.
NOTE: If the file name or path includes a space, you must enclose the file name or path in
quotation marks. For example, type: C:\>copy /b "C:\MY DOCUMENTS\8060FW.RFU" \
\YOUR_SERVER\YOUR_COMPUTER.
3. Press Enter on the keyboard. The control panel shows a message that indicates the progress of
the firmware upgrade. At the end of the upgrade process, the control panel returns to the Home
screen. The message 1 file(s) copied appears on the computer screen.
ENWW Upgrade the firmware 107