HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Default Job Options menu
Use this menu to define the default job options for each function. If the user does not specify the job
options when creating the job, the default options are used. To configure default digital-send options
(sending to e-mail or a network folder), go to the embedded Web server by typing the network address
of the device into a Web browser. For more information, see
Use the embedded Web server
on page 88.
NOTE: This menu is also available through the embedded Web server. In the embedded Web server,
select the Settings tab, and then select Configure Device from the menu on the left side of the screen.
See
Use the embedded Web server on page 88.
The Default Job Options menu has three sub-menus:
●
Default Copy Options (Set the copy options at the control panel only.)
●
Default Fax Options
●
Default Print Options
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Default Copy Options
Table 7-3 Default copy options menu
Menu item Sub-menu item Values Description
Copies Type the number of copies.
The factory default setting is
1.
Set the default number of
copies for a copy job.
Sides 1-sided original, 1-sided
output*
1-sided original, 2-sided
output
2-sided original, 1-sided
output
2-sided original, 2-sided
output
Select the option that
indicates the number of
printed sides in the original
document and for the
copies.
Color/Black Color Mode Auto detect*
Color
Black
Specify whether copies will
be in black or in color.
Color Quality Professional*
General Office
ENWW Default Job Options menu 115