HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Menu item Sub-menu item Values Description
Stamp Set Number Format 0001, 0002, 0003, …
1,2,3, …
0001/1000, 0002/1000, …
1/1000, 2/1000, 3/1000, …
Use this feature to print the
set number on copies. For
example, if you are making
five copies of a document,
each page in the first set of
copies is stamped with the
number 1. The set-number
stamp is not transparent.
First Page Only Off*
On
Starting Set Number Type a value.
Type Style Sans serif
Serif*
Type Size Select a type size from the
list.
Rotation Angle 0 degrees*
90 degrees
180 degrees
-90 degrees
Stamp Position Select a position from the
list. The factory default is On
Position 1.
Stamp Position Horizontal
Offset
Type a value.
Stamp Position Vertical
Offset
Type a value.
Edge-to-Edge Normal (recommended)*
Edge-to-Edge Output
If the original document is
printed close to the edges,
use the Edge-to-Edge
Output feature to ensure that
the maximum amount of
content is copied. However,
shadows might appear
along the edges.
Job Build Job Build Off*
Job Build On
Use this feature to combine
several sets of original
documents into one copy
job. Also, use this feature to
scan an original document
that has more pages than
the document feeder can
accommodate at one time.
Auto Layout Auto layout on
Auto layout off*
When the auto layout feature
is on, you can place the
original document anywhere
on the flatbed glass. The
device senses the edges of
the document and centers
the image on the copy.
Table 7-3 Default copy options menu (continued)
ENWW Default Job Options menu 123