HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Menu item Sub-menu item Values Description
Auto Crop Auto crop off
Auto crop on*
Use this feature to remove
dark areas from the
background when you copy
with the flatbed cover open.
Image Justify Justify Front Side Select a position from the
list. The factory default is
Off.
Use this feature to move the
image to an edge, a corner,
or the center of the page.
Auto Reduce Off*
On
Justify Back Side Select a position from the
list. The factory default is
Off.
Mirror front side Off*
On
Erase Edges Front side erase
Back side erase
All edges
Mirror front side
Use this feature to remove
any dark lines that appear at
the edges of copies.
Image Shift Front side shift
Back side shift
Reduce to fit
Mirror front side
Use this feature to shift the
image on the page. This
feature is similar to Image
Justify, but it moves the
image by a particular
measurement.
Erase Gutter Erase gutter off*
Erase gutter on
Use this feature to remove
the shadows that appear in
the center of copies when
you copy an open book or
when you copy two pages
next to each other.
Image Repeat Image Repeat Image repeat off*
Image repeat on
Use this feature to copy the
same image multiple times
on a single sheet of paper.
Cut Lines On
Off*
Select Cut Lines to print a
dashed line between each
image so that you can cut
them apart.
Automatic Rotation On
Off*
Select Automatic Rotation to
fit the most images possible
on a page.
Default Fax Options
Use the following menus to configure default send and receive options for fax jobs.
Table 7-3 Default copy options menu (continued)
124 Chapter 7 Administration menu ENWW