HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Management menu
Use this menu to set up global device-management options.
NOTE: This menu is also available through the embedded Web server. In the embedded Web server,
select the Settings tab, and then select Configure Device from the menu on the left side of the screen.
See
Use the embedded Web server on page 88.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Table 7-8 Management menu
Menu item Sub-menu item Values Description
Network Address Button Display*
Hide
Use this feature to hide or show
the Network Address button that
appears on the Home screen.
Sleep Mode Disable
Use sleep delay*
Use sleep schedule
Maximum power savings
Custom power saving
Use this feature to customize the
Sleep mode settings for this
device.
●
Select Use sleep delay to
set the device to enter Sleep
mode after the delay that is
specified in the Time/
Scheduling menu.
●
Select Use sleep schedule
to use the Sleep Schedule
that is specified in the Time/
Scheduling menu.
●
Select Maximum power
savings to enable the Sleep
Schedule with default
values and use the shortest
Sleep Delay.
●
Select Custom power
saving to enable the Sleep
Schedule and use a longer
Sleep delay so that the
device is less likely to go into
sleep mode during normal
business hours.
Manage Supplies
NOTE: The HP logo only
appears in front of the supply
name when genuine HP supplies
are used.
Empty Override Use this menu to carry out
administrative supply
management tasks such as using
refilled ink cartridges, using
cartridges not manufactured by
HP, or changing the threshold
when supplies should be
ordered.
Use Non-HP Cartridge
Supply Low/Order Threshold Select a value in the range.
ENWW Management menu 131