HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Menu item Sub-menu item Sub-menu item Values Description
Grain Direction 11x17 and
A3
Long-grain Paper
Short-grain Paper
(Default setting might vary
by country/region)
Use this option to specify
the grain direction of
11x17 and A3 size paper
to be used in the device,
for paper weights less
than 120 g/m² (32 lb).
Long-grain paper can be
processed faster for these
larger paper sizes.
However, specifying
Long-grain Paper while
using a short-grain paper
can result in paper jams
and reduced print quality.
(If the standard weight of
11x17 or A3 size paper
used in the device is
always 120 g/m² (32 lb) or
heavier, the Long-grain
Paper setting should be
selected, regardless of
the actual grain direction.)
Manually Feed Prompt Always*
Unless loaded
This feature applies to
print jobs. Indicate
whether a prompt should
appear when the type or
size for a job does not
match the specified tray
and the device pulls from
the multipurpose tray
instead.
Select Always to show the
prompt every time the tray
does not match the
setting. Select Unless
loaded to show the prompt
only when the tray is
empty.
PS Defer Media Enabled*
Disabled
Use this feature to choose
either the PostScript (PS)
or HP paper-handling
model.
Use Another Tray Enabled*
Disabled
Use this feature to turn on
or off the control-panel
prompt to select another
tray when the specified
tray is empty.
Size/Type Prompt Display*
Do not display
Use this feature to control
whether the tray
configuration message
appears whenever a tray
is opened or closed.
Duplex Blank Pages Auto*
Yes
Use this feature to control
how the device handles
two-sided jobs
(duplexing).
Table 7-13 Device Behavior menu (continued)
146 Chapter 7 Administration menu ENWW