HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Menu item Sub-menu item Sub-menu item Values Description
Bin/Binding Behavior Staples Out Continue*
Stop
Use this option to stop
printing if the finisher is
out of staples.
Job Offset On*
Off
Use this option to slightly
shift each completed job
as they are stacked in the
finisher output bin.
Function Separator Mode Function separator*
Mail box mode
Use this option to set the
finisher to operate in
separator or mailbox
mode.
NOTE: The mailbox
mode setting requires
Web JetAdmin.
In mailbox mode, this item
specifies the default
output bin for each type of
job (print, copy, received
fax) and updates the
default Output Bin dialog
selection for the Copy
application.
General Printing
Behavior
Default Paper Size Select from the list of
paper sizes.
Use this feature to
configure the default
paper size used for print
jobs.
Override A4/Letter No
Yes*
Use this feature to print on
letter-size paper when an
A4 job is sent but no A4-
size paper is loaded in the
device (or to print on A4
paper when a letter-size
job is sent but no letter-
size paper is loaded). This
option will also override
A3 with ledger-size paper
and ledger with A3-size
paper.
Manual Feed Enabled
Disabled*
When this feature is
enabled, the user can
select manual feed from
the control panel as the
paper source for the job.
Edge-to-Edge Override Enabled
Disabled*
This feature allows the
device to print text or
images as close as
possible to the edge of the
paper.
Courier Font Regular*
Dark
Use this feature to select
which version of the
Courier font you want to
use.
Table 7-13 Device Behavior menu (continued)
ENWW Device Behavior menu 147