HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Menu item Sub-menu item Sub-menu item Values Description
Wide A4 Enabled
Disabled*
Use this feature to change
the printable area of A4-
size paper. If you enable
this option, eighty 10-pitch
characters can be printed
on a single line of A4
paper.
Print PS Errors Enabled
Disabled*
Use this feature to select
whether a PostScript (PS)
error page is printed when
the device encounters a
PS error.
Print PDF Errors Enabled
Disabled*
Use this feature to select
whether a PDF error page
is printed when the device
encounters a PDF error.
Personality Auto*
PCL
PDF
PS
Use this feature to
configure the default print
language or personality
for the device. Normally
you should not change the
device language. If you
change the setting to a
specific device language,
the device does not
automatically switch from
one language to another
unless specific software
commands are sent to it.
PCL Form Length Type a value between 5
and 128 lines. The factory
default is 60 lines.
PCL is a set of printer
commands that Hewlett-
Packard developed to
provide access to printer
features.
Orientation Portrait*
Landscape
Font Number Type the font number. The
range is between 0 and
999. The factory default is
0.
Use this feature to specify
the font number for the
user-soft default font
using the source that is
specified in the Font
Source menu item. The
device assigns a number
to each font and lists it on
the PCL font list (available
from the Information
menu).
Font Source Internal
USB
Use this feature to specify
the location of the fonts for
the device to use.
Table 7-13 Device Behavior menu (continued)
148 Chapter 7 Administration menu ENWW