HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Supported paper
The device produces high-quality documents in the fastest possible time when you follow these
guidelines:
●
The device is designed to work with a broad range of plain papers for general-office use. For
optimum performance, use paper from the list of recommended papers.
●
Always configure the tray for the correct paper type, and select the correct type from the printer
driver.
Before using any paper, verify that it is of good quality and is free of cuts, nicks, tears, spots, loose
particles, dust, wrinkles, curls, or bent corners.
Recommended paper
The paper types that are listed in this section have been tested and are known to work with the device.
These paper types are divided into three categories:
●
HP-brand tested and qualified papers. Use these paper types for the best results. Some of these
papers have been specially formulated for use with this device.
●
HP-brand papers that are not specifically optimized for this device. These papers work with the
device, but the results might be of lesser quality than when using the tested and qualified papers.
●
Certain non-HP brand papers. These paper types produce satisfactory print quality.
NOTE: Because HP cannot control paper formulations for these non-HP papers, future results
might not match past testing.
HP-brand paper is available at www.hpshopping.com or from local office-supplies retailers.
CAUTION: Using paper or other print media that does not meet HP specifications might cause
problems that require repair. This repair is not covered by the HP warranty or service agreements.
The device does not support envelopes or transparencies.
154 Chapter 8 Paper and trays ENWW