HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Copy from the glass
1. Place the original document face-down on the glass.
2. Align the corner of the original with the upper-left corner of the glass.
To use the default copy options, use the numeric keypad on the control panel to select the number of
copies, and press Start.
To use customized settings, touch Copy. Specify the settings, and then press Start. For more information
about using customized settings, see
Adjust the copy settings on page 173.
NOTE: You can use either the hard Start button on the control panel or the Start Copy button on the
touchscreen.
In most cases, the device automatically detects the size of the original document on the glass. If the
original is a nonstandard size, or if you want to copy only part of it, use the Original Size feature to turn
off automatic size detection, and then specify the area to copy:
1. From the Home screen, touch Copy.
2. Touch More Options
3. Touch Original Size
4. Select the size you wish to scan, and then touch OK. This turns off automatic size detection.
5. Touch Start Copy
172 Chapter 9 Copy ENWW