HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Macintosh printer driver features
NOTE: Settings in the printer driver and software program generally override control-panel settings.
Software-program settings generally override printer-driver settings.
Select a tray
You can print all pages on the same paper, or you can print the first page on one type of paper and print
the remaining pages on a different type of paper.
1. On the File menu, click Print.
2. Open the Paper Feed menu.
3. To print all pages on the same paper, select All pages from, and then open the drop-down list
and select which tray to use.
4. To print the first page on a different type of paper than the remaining pages, select First page
from, open the drop-down list, and select the tray. Also select the tray for Remaining pages
from.
Select an output bin
1. On the File menu, click Print.
2. Open the Finishing menu.
3. On the Finishing tab, next to Output Destination, select which output bin to use.
NOTE: All stapled output is delivered to Output Bin 5.
Select a paper type
Rather than instructing the device to use a specific tray, you can specify that the job is printed on a
particular type of paper. The device uses a tray that contains that type of paper, or it prompts you to
load the correct type.
1. On the File menu, click Print.
2. Open the Finishing menu.
3. On the Finishing tab, next to Media Type, select the type of paper to use.
Set the color quality
1. On the File menu, click Print.
2. Open the Color/Quality Options menu, and select the Basic tab.
3. To print in color, select Color Print. Next to Color Quality, select either Professional or General
Office.
ENWW Macintosh printer driver features 215