HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Connect to a phone line
The device must be connected to an analog phone line to send and receive faxes. Connect the device
to a phone line by doing the following:
1. Remove the label that covers the Fax (RJ11) interface port.
2. Plug one end of a phone cable into the Fax (RJ11) interface port.
WARNING! For protection against overvoltage, use a minumum 26 AWG cable to connect to the
device modem module.
ENWW Connect to a phone line 19