HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Where to configure settings
Some device settings must be set up at the device control panel, but other settings must be set up
remotely by using the embedded Web server (EWS) or HP Web Jetadmin (WJA) software. Perform the
setup at the device before performing the remote setup procedures. The following table indicates which
settings to configure at the device and which to configure remotely.
Table 4-1 Where to configure settings
Device Feature Setting to configure Set up at the
control panel
Set up
remotely
Link for more information
Copy Default job options for all copy
jobs
X Default Job Options menu
on page 115
Restrict color copying X Restrict color use on page 73
E-mail Basic e-mail settings, including
setting up the SMTP server.
X X Control panel setup:Initial e-mail
setup on page 37
Set up the SMTP server and set
up default settings to use for all e-
mail attachments.
X Advanced e-mail setup
on page 41
Restrict e-mail address fields for
e-mail attachments.
X Advanced e-mail setup
on page 41
Set up SMTP for the notification
server (used for Alerts and
Autosend).
X Set up the notification server
on page 97
Import address books from a
shared LDAP server.
X Import e-mail addresses from
other sources on page 43
Import individual users' personal
contacts from a Microsoft
Windows exchange server.
X
Import e-mail addresses from a
Comma-Separated Value (.CSV)
file.
X
Send to Folder Enable the Network Folder
feature.
X Network folder setup
on page 50
Set up predefined Quick Access
Folders, and the default job
settings for each folder.
X
Configure default settings that
apply to all files sent from the
device to a network folder.
X
34 Chapter 4 Configure device settings ENWW