HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Initial fax setup
If an analog fax accessory is installed in the device, use the Initial Setup menu to establish basic fax
settings. The Fax feature on the Home screen is not active until you use the Fax Setup Wizard in this
menu.
NOTE: To establish specific fax settings as the defaults for all incoming fax jobs, use the Default Fax
Options menu. For more information see
Set the default fax options on page 39.
NOTE: To set up LAN fax or Internet fax, use the embedded Web server. For more information, see
Fax send setup on page 52.
Use the Fax Setup Wizard
To enable the fax feature and provide basic information that is required for faxing, use the Fax Setup
Wizard.
1. From the Home screen, scroll to and touch Administration.
2. Touch Initial Setup, and then touch Fax Setup.
3. Touch Fax Setup Wizard.
4. Select your country/region from the list. Fax communication standards vary according to country/
region. Touch Next.
5. Type the information for your company. This information is used in the fax header, which appears
at the top of each page in the fax. Touch Next.
6. Select the format for date and time and then set the date and time. Touch Next.
7. If you need to use a dialing prefix, select Dialing Prefix on, and type the number in the box. Touch
Next.
8. Review the information. If it is correct, touch Finish. If you need to make changes, touch
Previous to return to the previous screen.
9. Make sure the device is connected to a working phone line.
Use the Fax Setup menu
After you have enabled faxing by using the Fax Setup Wizard, use the other options in the Fax Setup
menu to establish preferences for sending and receiving faxes. These preferences include settings such
as the fax dial volume, the number of times to redial when the line is busy, and the dialing mode.
1. From the Home screen, scroll to and touch Administration.
2. Touch Initial Setup, and then touch Fax Setup.
3. Several options are available in this menu. Configure the settings according to your preferences.
NOTE: For a complete list of the available settings and a description of each one, see Fax Setup
menu on page 140. The built-in Help system on the device provides an explanation of each option.
Touch the Help button (
) in the upper-right corner of the screen.
4. To exit the Administration menu, touch the Home button ( ) in the upper-left corner of the screen.
38 Chapter 4 Configure device settings ENWW