HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

Configure device settings remotely
You can establish most device settings remotely by using the embedded Web server. The embedded
Web server provides access to advanced settings that are not available through the control panel.
NOTE: The embedded Web server also contains many of the same menus that are available in the
Administration menu on the device control panel.
If you are managing a group of devices, use HP Web Jetadmin to configure settings and distribute them
to each device in the group. Most of the settings that are available in the embedded Web server are
available in HP Web Jetadmin. For more information, see
Use HP Web Jetadmin on page 96.
The following procedures provide information for using the embedded Web server to set up specific
features. For a description of all the features that are available in the embedded Web Server, see
Use
the embedded Web server on page 88.
Open the embedded Web server

Open a supported Web browser, and type the device network address or hostname in the address
line.
NOTE: To find the network address or hostname, go to the device control panel. Touch Network
Address, and touch Print to print an HP Jetdirect configuration page. The network address or
hostname is on that page.
The following table lists the browsers that the embedded Web server supports.
NOTE: Browsers must be Javascript-enabled.
Table 4-2 Supported browsers for the embedded Web server
Operating system Supported browsers
Microsoft Windows
●
Microsoft Internet Explorer 6.0 and later
●
Firefox 1.0 and later
●
Netscape 7.0 and later
●
Mozilla 1.6 and later
●
Opera 7.0 and later
Mac OS X
●
Safari 1.2 and later
●
Firefox 1.0 and later
●
Netscape 7.0 and later
●
Mozilla 1.6 and later
●
Opera 7.0 and later
HP-UX 11 and later
●
Mozilla 1.6 and later
Linux
●
Konqueror 3.2 and later
●
Firefox 1.0 and later
●
Netscape 7.0 and later
●
Opera 7.0 and later
40 Chapter 4 Configure device settings ENWW