HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide

LDAP sign-in setup
1. To enable the LDAP sign-in method, select the Enable LDAP Sign In check box.
2. Next to LDAP Server Address, type the network address of the LDAP server. The address can
be a fully-qualified DNS name or an IPv4 address in dotted-decimal notation.
3. Type the Bind Prefix, the Bind and Search Root, and the Port in the appropriate boxes.
4. You can change the default attributes that the device uses to verify the user if you need to. However,
HP recommends that you use these default attributes.
5. To verify that the sign-in method is working correctly, click Test LDAP Authentication.
6. Enter a username and password.
7. Click OK to test the Windows sign in.
8. Click Cancel to return to the Sign In Methods tab.
9. At the bottom of the page, click Apply to save the settings.
Novell NDS sign-in setup
1. To enable the Novell NDS sign-in method, select the Enable Novell NDS Sign In check box.
2. For each tree domain that you want the device to recognize, click Add below the box for Trees.
3. Type the tree to add and click OK.
4. Next to Novell Server Address, type the network address of the Novell server. The address can
be a fully-qualified DNS name or an IPv4 address in dotted-decimal notation.
5. Type the Context, the Bind Prefix, and the Bind and Search Root in the appropriate boxes.
6. Select the Novell tree to use as the default.
7. Click Test Novell NDS Sign In to verify that the sign-in method is working correctly.
8. Select an NDS tree, and then enter an NDS context, a username, and a password.
9. Click OK to test the Novell sign in.
10. Click Cancel to return to the Sign In Methods tab.
11. At the bottom of the page, click Apply to save the settings.
72 Chapter 5 Secure the device ENWW